Page 1 of 1
Tutorial 6 - Help with interfacing a keypad
Posted: Sun May 15, 2011 4:54 pm
by Fluroblue
im using my keypad now and ive finished it. a problem ive come across is that when i press the buttons its not matching, i wasnt sure how the connections from the keypad to the board went so i just put lined them up like in the schematic, so i think thats the problem. so if you guys know plz tell
(Edited - I have moved this post here to give it it's own topic. bitfogav)
Re: Tutorial 6 - Help with interfacing a keypad
Posted: Sun May 15, 2011 9:18 pm
by bitfogav
Hi Fluroblue,
Sounds to me that you connected your keypad incorrectly, heres some diagrams which might help you connect up the keypad correctly
Hope this Helps.
- 3x4keypad.jpg (36.29 KiB) Viewed 20825 times
Re: Tutorial 6 - Help with interfacing a keypad
Posted: Sun May 15, 2011 10:06 pm
by Fluroblue
Brilliant! it works thanks for that!
Re: Tutorial 6 - Help with interfacing a keypad
Posted: Mon May 16, 2011 9:56 am
by brad
Nice work bitfogav!
Re: Tutorial 6 - Help with interfacing a keypad
Posted: Sun Jul 01, 2012 11:49 am
by nodoubtman
Hi! I have bought this keypad :
http://www.abra-electronics.com/product ... rrencyId=2
it got 8 pins, i cannot find the datasheet, someone can help me with these pins according to brad tutorial?
thanks a bunch!
marC:)
Re: Tutorial 6 - Help with interfacing a keypad
Posted: Sun Jul 01, 2012 5:21 pm
by brad
I just did a google search for keypad pinout and it had this image. It could be what you need.
(Image from
http://talkingelectronics.com/pay/PIC/PIC-Page21.html)
Re: Tutorial 6 - Help with interfacing a keypad
Posted: Mon Jul 02, 2012 12:23 am
by nodoubtman
thank you so much brad! i will let you know how it goes
thanks!
marC:)