Code: Select all
// F_CPU tells util/delay.h our clock frequency
#define F_CPU 8000000UL // Clock frequency (8MHz)
#include <avr/io.h> // avr input and output header
#include <util/delay.h> // avr delay header
int main (void)
{
DDRB = 0xFF; // all PORTB Outputs
while(1) // do forever...
{
PORTB |= 1 << PB0; // LED on
_delay_loop_2(40000);
PORTB &= ~(1 << PB0); // LED off
_delay_loop_2(40000);
}
return 0;
}
it doesn't supply power to your projects unlike the pickit2.. but easy enough to connect to a bread board, One other note that I have found with this programmer is that all your projects need a on board power supply (a simple voltage reg would do the trick) As there is what is known as a power supply buffer on the programmer, basically so the programmer knows if your Atmel microchip is a 3.3volt or 5v microchip.
... Very clever guy though,